Dlink WRB router is a networking device that has easy setup instruction and has simple process of configuring the settings. In this informative article, you will go through a smooth Dlink WRB 1310 WiFi router setup process. In which you will learn hardware setup and process of managing the settings and networks. We also provide at the last of the article some troubleshooting tips that help you to maintain the performance of the router. Let’s start with ‘how to install the hardware of the router’ section.
How to Complete Router’s Hardware Setup?
-
Place Router to Optimal Location
You have to choose a place for your Dlink WiFi router which should be far away from electronic devices and concrete walls. Because these things can interrupt the WiFi signals that are coming from your WiFi router. Remember, you have to choose a spot near to the cable modem, so that you can link the router to the modem via Ethernet cable.
-
Link Router to Cable Modem
After placing the WiFi close to the modem, you must connect your router to the modem by an Ethernet cable. Make sure the network cable is in good condition. Now, you have to insert the cable ends to WAN or internet port of router and LAN port of the cable modem.
-
Turn On WRB 1310 Router
To start the router, you must connect a power cord to the router’s power port and then insert it into the electric wall socket near to the WiFi. Then locate power button on the router and press it to turn your Dlink device on.
We hope you have completed the hardware configuration easily with the help of above-mentioned paragraphs. Now, let’s start the second section of the article, that will give you step by step information about how to manage the settings and network of the Dlink WRB WiFi router.
How to Configure Settings of WiFi Router?
-
Link Your Computer
The first step to configure the settings of the router is linking your computer with the router’s network via Ethernet cable. Don’t use wireless connections to access the interface of the router like laptop or phone.
-
Reach Login Interface
After establishing link with the computer, you have to open up any web browser in your computer. Now, locate address bar and search in the login URL that is dlinkrouter.local. This URL takes you to the interface login page. You will see username and password space blanks. You must fill them using the user manual that comes with the router and click on the SIGN IN button.
-
Manage Router’s Settings
Now, you have entered the interface of the Dlink WAB 1310 WiFi Router. In this interface, you can manage the settings and networks of the WiFi router. Also, with the help of the main dashboard of the interface, you can update your router’s firmware and enable or disable many features that Dlink router provides to enhance your internet service.
Now, let’s take a short tour of some troubleshooting tips right down here.
Troubleshooting Tips
- Don’t put electronic devices near the router.
- Update your router whenever firmware latest version is available.
- Clean your router if you see any dust on the back of the WiFi.
- Don’t use damaged network cable.
In Conclusion
Now, it is the end of this informative article in which you have learned how to setup Dlink WRB 1310 WiFi router. In this installation process, you have gathered information about how to setup the hardware of the router and how to manage the settings and networks of the WiFi. We hope, you have completed the setup and enjoying the seamless internet service in your home.
