Why is it better to install a shower enclosure?Those who use an ordinary shower often encounter the following problems:
- on walls that are constantly doused with water, mold, and unpleasant-smelling fungus form;
- bathing in the shower while standing in the bathroom is at least uncomfortable;
- curtains do not protect well from pressure, so the floors are usually flooded after water procedures.
- As a result, you not only infringe on your convenience by using an ill-conceived design but also harm your body. When you wash in hot or warm water, these harmful organisms emit an odor that is dangerous for your lungs! The best solution to this situation is to install a shower corner or periodically disinfect the room.
What should you first pay attention to when choosing a shower enclosure?
Of course, no matter the quality of this installation, it will only be usable if you have somewhere to install it. First of all, you should decide on the design of the bathroom. If there is now a “Soviet-style” shower installed there, calculate how much space will be freed up when you remove it. You will be surprised how much space was wasted.
First, you should choose the shape of the shower, each of which has its position in the setting:
- Square It would be great in a corner or the middle of a bathroom.
- Rectangular is Best for the corner position.
- The oval is Often installed in a corner, forming a semi-oval.
- Round is Ideal for placement in the center of the bathroom. The room should be significant.
In general, the pallet determines a lot. Usually, the shower corner is equipped with one. If this is the case, then the shape of the entire structure may depend entirely on the bottom of the cabin. You should carefully consider the choice of pallet material. Here are the offers:
- enamel;
- ceramics;
- cast iron;
- steel;
- quail;
- acrylic.
- Acrylic pallets are the most pleasant to the touch and are of high quality, so they are the most popular among buyers.
Will the shower corner leak?
The question that worries the majority of those thinking about purchasing this design. Fortunately, there is no reason to be nervous and refuse a shower since manufacturers take this fact into account – the installation is airtight. This largely depends on the people who install the corner. Complete tightness must be maintained. Usually, seals at the bottom of the hub should fit snugly against the walls and bottom of the shower. If you order a corner installation, make sure several times that the assemblers did the job correctly; otherwise, a leaking battery will become a burden rather than a comfortable purchase.
Pay close attention to the doors that you choose. They must also seal tightly. Here’s what you have to choose from:
- Opening type Varieties
- Swing Single-leaf, double-leaf, pendulum.
- Sliding Retractable, folding.
- If you decide to take swing ones, remember they require more free space. In this regard, referring to the catalog with sliding doors is better. The best option is one with sliding doors – they open along a guide adjacent to the corner walls, creating even more free space.
What wall material should I choose for my shower enclosure?
There are two options:
- polystyrene;
- glass.
- The fact is that polystyrene is not an eternal material, and over time, it will begin to fade and turn yellow. So, after ten years, the transparent corner will turn into a bland cabin with painted-over walls. But glass has a beneficial effect on humans. Treat it with AntiCalc. It is thanks to this that time and limestone in the water do not have any impact on the product. If you wipe it down periodically, it will remain shiny and light-transmitting for decades.
- After choosing the wall material for shower enclosure, consider what thickness you will need. It’s better, of course, to take the maximum – somewhere around 8-10 mm, but six is quite enough. In addition, glass comes in different formats. There are more exclusive offers – bronze, decorated, foggy, painted glass. The solution to this issue depends entirely on your design project.
How to install a shower enclosure?
Under no circumstances should you undertake shower enclosure you choose by yourself. This practice is often disastrous. Wanting to save money, they usually spend twice as much. It is best to order an expert installation right away.There are many companies that offer leaking shower repairs in Melbourne. There are several ways to seal a structure:
- seals;
- special bottom profile.
- Water flow needs to be carefully considered. Some people experiment by making a corner out of a shower room and a bathtub. To do this, you need to take care of the shape of the pallet, its material, and the size of the corner.
What are the alternatives to a shower enclosure?
The critical competitor is shower stalls or boxes. Their advantage lies in greater functionality. In the boxes, you can enjoy a massage, listen to music, and even breathe in the aromas of flowers (there is such a function). However, the corners look more realistic than the boxes. The latter are easier to care for. And the last argument in favor of an ordinary corner is its cheapness. To buy a good cabin, you must pay separately for each function.
Where to buy a shower enclosure?
Since this is a straightforward design. If you know how to do calculations, you can draw a non-standard corner shape yourself. All you need is 2-4 glasses. In any case, the main thing is to take care of the sealant. Sometimes, you must install a pedestal under the shower to place the toilet underneath to drain the water.
Also raed: Embracing Nature’s Beauty: Countertops for Modern Living Spaces
But showers are often purchased ready-made in stores – it’s cheaper and faster. If this sounds like you, we recommend contacting the Internet about this. The advantage of online shopping is that online stores are always more affordable than physical stores – you don’t have to pay rent, have a small staff, etc. In addition, online stores have visual catalogs.
A shower corner is a chance to expand the bathroom space and make water procedures pleasant.
