TP-link range extender provides user a seamless network connection in every corner of your home. You can easily complete the TP link extender setup and it is also easy to connect and use. If you had setup your router and you are facing troubles related to your WiFi extender like networking device is not working. Here, in below-written informative paragraphs you will get help to find out the possible reasons why your extender is not working. We will give you solutions as well that help you fix your WiFi device. Let’s begin with possible reasons of this issue.
Reasons Why Your Range Extender Not Working?
Down here is a list where you will go through reasons of this mentioned problem.
1. Network interruptions is a solid reason why your networking device not working.
2. Incorrect router to range extender (inserting Ethernet cable into wrong ports of router and extender) can cause this issue.
3. Damaged Ethernet cable and electric wall socket that use for connections and supply power to the range extender also is a reason of this issue.
Now, look how you can solve ‘extender not working’ problem which is written below here.
How You can Solve ‘Extender Not Working’ Issue?
Change to Optimal Location
- Network interruption that occurs from the electronic devices like microwave ovens is a solid reason of the mentioned issue.
- So, make sure there are no electronic devices near to your networking device.
- If you find any, then shift your range extender to an optimal location where the router is nearby, so that you can connect it to the repeater.
Ensure Router to Extender Link
- Router to extender connection provides you fast internet service in every corner of your house.
- So, ensure that the router is correctly connected to range extender via an Ethernet cable.
- If the cable is connect into the wrong ports of both networking devices, then just pull out the cable and insert it into the correct ports that is WAN port of extender and LAN port of router.
Check for Damaged Cable
- Damaged Ethernet cable can also cause this ‘extender not working’ problem.
- To dispel this problem, you have to replace it with a new one.
- Also, check if the wall socket is damaged or not. If it is damaged then call an electrician to fix it.
Clean TP-Link WiFi Extender
- Dust can be also a reason why your range extender is not working.
- Check if there is any dust on the back of the device. If you see dust, then clean it with a cotton cloth.
Sometimes, these above-written troubleshooting tips can’t solve the issue as well. In that case, you should apply below written some other solutions.
Some Other Solution
1. Reboot Range Extender
In above-mentioned situation, you can perform a reboot process on the TP-link range extender. To perform a restart, you just have to plug it out from the wall socket and plug it in again to restart.
2. Perform Factory Reset
Sometimes, rebooting does not work as well. So, in that case, you can factory reset the range extender by locating the reset button on the back of the networking device. Just long press it and then it starts the reset process itself.
After the reset, you have to configure the settings of the repeater by logging into the interface via login URL, IP address or TP link app.
End Words
Here are the end words of this full of information article in which you have learned possible reasons why your extender not working. We have also shared solutions to fix the ‘extender not working’ issue. We hope you have found out the reason and solved it with the help of this article.
