Wireless-N WiFi repeater – the best networking device to consider today. The device delivers high-speed WiFi to its users to access everywhere in their house. Despite being the outstanding device, the WiFi repeater are giving red light issue to a number of users. On the off chance, you are one of them, this repeater troubleshooting guide will surely prove helpful. Just implement the fixes provided here and we assure you that, by the time you reach the end of this page, the WiFi repeater red light issue will go far away from you that was preventing you from doing Wireless-N WiFi repeater setup or login. Continue reading!
Why Getting WiFi Repeater Red Light Issue?
There are many reasons behind giving you the red light issue. Have a quick nudge at them. Scroll down a little!
- Technical glitches
- Poor power supply to the repeater
- No internet
- Improper placement of the device i.e. the repeater
- Unstable connection between your WiFi repeater and internet router
- Wireless-N WiFi repeater setup not done in a proper manner
That’s it! These were the reasons causing WiFi repeater red light issue.
How to Fix WiFi Repeater Red Light Issue?
Here are the best fixes for you that will prevent you from experiencing the red light issue:
Restart Your WiFi Repeater
One of the primary reasons why you are getting the red light issue is because of technical glitches. Wipe out that sweat from your forehead. To keep glitches at bay, we suggest you restart your Wireless-N WiFi repeater.
Here are the instructions to restart your repeater:
Step 1: Unplug your WiFi repeater.
Step 2: You have to keep the repeater unplugged for 5-10 minutes.
Step 3: Thereafter, turn on your repeater and plug it back in again.
After restarting/ power cycling your WiFi repeater/ extender, we really hope that the red light issue is not troubling you now.
Ensure Proper Power Supply to the Repeater
On the off chance, you are still struggling with the same issue even after power cycling your WiFi repeater, then you must ensure that the wall socket to which you have plugged in the repeater is well-working and providing a steady and fluctuation-free electricity to your device.
Check Your Internet Connection
No luck? If so, you must check your internet connection. It is because of poor or slow WiFi that you are struggling with the red light issue. So, contact your ISP and if you find that your service provider is the culprit ask him to resolve it as soon as possible.
Change the WiFi Repeater’s Location
Still the same? Yes? Then, you must try changing your repeater’s current location. Chances are your device is placed at a location due to which you are unable to make the most out of it.
For instance, if you have placed the repeater on a higher location, place it somewhere on a lower surface. And, if the repeater is placed on a lower surface, try placing it a bit higher. Also, if you have placed your device i.e. the repeater back of your computer, beneath study table, inside show window, closet, or almirah, ensure to place it openly.
Verify Connection between Your WiFi repeater and Router
Did you connect your Wireless-N WiFi repeater? No? Then, you have the most common in hand behind getting the red light issue. So, without thinking much, connect the repeater and your router using an Ethernet cable. If you have problem wiring your devices or you don’t have the cable handy, then you can connect them wirelessly (WPS source). For this, keep your router and repeater at a fair distance and press the WPS button on your router and within 30 seconds, press WPS button on your WiFi repeater.
Reset and Reconfigure Wireless-N WiFi Repeater
Last, but not least, if none of the fixes listed above bring you luck, then it means that Wireless-N WiFi repeater setup process is not done in a correct manner. For this, you must reset the device in discussion back to its factory default values.
For resetting WiFi repeater, locate the reset hole on your repeater, press it using a paper clip, hold it for 8-10 seconds, and release it. Once you are done with resetting the repeater, set it up from scratch using 192.168.10.1 IP and default WiFi repeater login credentials.
What after setting up the WiFi repeater again?
After setting up the repeater, you have to update its firmware to the latest version. Updating repeater’s firmware ensures that the repeater’s performance will remain up-to-the mark always. So, update the Wireless-N WiFi repeater firmware on a regular basis.
Outdated repeater’s firmware can be one of the major reasons behind WiFi repeater red light issue. So, ensure to keep the repeater’s firmware up-to-date always.
Was this article helpful?
